ICSP-12; Sept 15-18, 2014, Goslar, Germany

Program Schedule: Wednesday, September 17

Wednesday, 17.09.2014
Session	Time	Room	Moderator	Presenter	Co-authors	Title
5A	09:00 - 09:25	Großer Saal	H. Polanetzki	I. Altenberger Wieland Werke, Germany	M. Mhaede, H. A. Kuhn, L. Wagner, Y. Sano	Effect of swaging and mechanical surface treatments on the mechanical properties of the spray-formed ultra high strength copper alloy CuMn20Ni20
	09:25 - 09:50			W. Riehemann TU Clausthal, Germany	A. Kasakewitsch, C. Teichmann	Fatigue and damping behavior of PM produced aluminum matrix composites after shot peening
	09:50 - 10:15			S. Kikuchi Ritsumeikan University, JAPAN	Y. Nakamura, K. Nambu, M. Ando	Effects of ultrafine particle peening on fatigue properties of ASTM 5056 aluminium alloy
	10:15 - 10:40			H. Pan EPCO Testing Technology, China	Q. Feng, C. Jiang	Investigation on the transformation of sigma phase in shot peened duplex stainless steel at elevated temperature by rietveld method
5B	09:00 - 09:25	Marmorsaal	B. Eigenmann	M. Ramulu University of Washington, USA	H. Bae, H. Diep	Influence of shot peening coverage on residual stresses induced in aluminium alloy 7050-T745
	09:25 - 09:50			X. Xia South China University of Technology, China	X. Q. Cheng, X. F. Sheng, J. Wei	Effect of shot peening intensity on residual stress field of 7075 aluminium alloy
	09:50 - 10:15			C. Jiang Shanghai Jiatong University, China	P. Fu, X. Chen	Effects of different shot peening conditions on the distribution of residual stress and microstructure of 18CrNiMo7-6 steel
	10:15 - 10:40			H.-G. Brokmeier TU Clausthal, Germany	E. Mawaad, L. Wagner	Stress profile after shot peening by combined radiation methods
5C	09:00 - 09:25	Turmsaal	M. Guagliano	J. Ruiz-Hervias Technical University of Madrid, Spain	P. Muñoz, J. A. Porro, J. L. Ocaña	Residual stress measurements in laser shock processed materials
	09:25 - 09:50			T. Takata University of Tokyo, Japan	M. Enoki, A. Matsui, Y. Kobayashi	AE monitoring in water during laser shock peening process
	09:50 - 10:15			xxxxxxxxx		xxxxxxxxx
	10:15 - 10:40			xxxxxxxxx		xxxxxxxxx
Coffee Break	10:40 - 11:00
6A	11:00 - 11:25	Großer Saal	J. Champaigne	E. Daniel Metal Improvement Company, France	I. Huther	Improvement of the welding joints and components by shot peening for IIW
	11:25 - 11:50			J. Fuhr Metal Improvement Company, Germany	R. Fiebach, N. Stöcklein	The saturation point in accordance to the current SAE J443 - no problem to former processes
	11:50 -12:15			J. Derda Electronics Incorporated, USA	J. Champaigne	Mini-strips for limited access peening intensity measurements
	12:15 - 12:40			U. Raab TU Clausthal, Germany	C. Becker, L. Wagner	Influence of shot peening on the fatigue behavior of orbital friction welded titanium joints
6B	11:00 - 11:25	Marmorsaal	M. Ramulu	V. Llaneza University of Oviedo, Spain	F.J. Belzunce	Looking for the optimal shot peening treatment on quenched and tempered steels with different hardness levels
	11:25 - 11:50			Y. Aiba Keio University, Japan	K. Murai,M. Ohmiya, J. Komotori	Observation of particle behavior in fine particle peening process
	11:50 -12:15			C. Teichmann TU Clausthal, Germany	B. Eigenmann, M. Mhaede, L. Wagner	Fatigue performance of shot peened cp-Ti: effect of prior severe plastic deformation
	12:15 - 12:40			Y. Kameyama Tokyo City University, Japan	R. Takahashi, Y. Owaku, H. Sato, R. Shimpo	Effect of shot particle conditions on the transfer of copper induced by fine particle peening
6C	11:00 - 11:25	Turmsaal	I. Altenberger	E. Müller University of Applied Sciences Bochum, Germany	G. Feldmann	Deep cold rolling of Almen strips for process monitoring
	11:25 - 11:50			S. Fricke ECOROLL AG Werkzeugtechnik, Germany	K. Röttger	Deep rolling of bore holes with a diameter of 3 mm with a hydrostatic tool
	11:50 -12:15			Q. Liu Defence Science and Technology Organisation (DSTO), Australia	W. Zhuang, P. K. Sharp	Deep surface rolling to improve fatigue performance of laser cladding of aluminium alloy 7075-T65
	12:15 - 12:40			W. Zinn University of Kassel, Germany	A. Cherif, I. Nikitin, B. Scholtes	Deep rolling at lower and elevated temperatures - effects and consequences on fatigue behavior
Lunch	12:40 - 13:40	Clubraum (Fr��hst��cksrestaurant), Altdeutsche Stuben, Maximilian
7A	13:40 - 14:05	Großer Saal	S. K. Cheong	H. Usami Meijo University, JAPAN	Y. Takizawa, C. Keju, Y. Yamada, M. Ando	Applicability of micro shot peening as surface modification for rolling sliding interface
	14:05 - 14:30			L. Tr_ko University of _ilina, Slovak Republic	M. Guagliano, O. Bokuvka, F. Novy, M. Bandini	Influence of severe shot peening on high and ultra-high cycle fatigue life of 50CrMo4 steel
	14:30 - 14:55			K. McClurg Avion Solutions Inc., USA	Randy Buckner	Measuring intensity in small areas with complex geometry using mini Almen strips
	14:55 - 15:20			M. Guagliano Politecnico di Milano, Italy	S. Bagherifard, M. Bandini	Experimental analysis of the role of surface roughness on the fatigue behaviour of a shot peened low alloy steel
7B	13:40 - 14:05	Marmorsaal	H. Diep	Y. Harada University of Hyogo, Japan	K. Takahashi, Y. Sakamoto	Formation of Fe-Al intermetallic compound film on hot work tool steel by shot lining and heat treatment
	14:05 - 14:30			H. Mohassel Charkheshgar Co., Tabriz, Iran	M. Zehsaz, H. Vafadar, S. E. Saei, H. Zare	An experimental investigation on the effect of shot peening on the sound intensity level, profile and tooth alignment of spur gear
	14:30 - 14:55			K. Ono Kanazawa Institute of Technology, Japan	Y. Koiso, K. Oguri, Y. Watanabe, K. Hattori	Evaluation of shot peened aluminium by Doppler broadening of positron annihilation radiation technique
	14:55 - 15:20			T. Maaser Rösler Oberflächentechnik GmbH, Germany		Shot peening of landing gear component
7C	13:40 - 14:05	Turmsaal	J. Cammet	K. Treutler TU Clausthal, Germany	V. Wesling, A. Schram	Mechanical treatment of welded and brazed joints
	14:05 - 14:30			T. Nitschke-Pagel TU Braunschweig, Germany	H. Eslami-Chalandar, K. Dilger	Influence of the deformation intensity of different mechanical surface treatments on the fatigue strength of welded aluminium joints
	14:30 - 14:55			H. Polanetzki MTU Aero Engines, Germany	N. Huber, S. Forgues, M. Wollmann, C. Becker, L. Wagner	The comparison of a new needle peening process with conventional shot peening and rotary flap peening
	14:55 - 15:20			xxxxxxxxxx		xxxxxxxxxxxxxx
Coffee Break	15:20 - 15:40
8A	15:40 - 16:05	Marmorsaal	S. K. Cheong	J. Kritzler Metal Improvement Company,Germany		Increasing the flank load capacity by combination of shot peening and superfinishing
	16:05 - 16:30			P. Edwards Airbus Operations Limited, UK		The effect of shot peening on fatigue performance of anodised aluminium 7010T7651
	16:30 - 16:55			B. Gerin LAMPA, Arts et Métiers Paristech Angers, France	E. Pessard, F. Morel,C. Verdu	Characterising the impact of surface integrity on the fatigue behaviour of a shot-peened connecting rod
	16:55 - 17:20			xxxxxxxxxxx		xxxxxxxxxxxxxx
8B	15:40 - 16:05	Turmsaal	M. Wollmann	N. Kawagoishi Dai-ichi Institute of Technology, Japan	Q. Chen, K. Kariya, T. Nagano, Y. Kobayashi, T. Tsuji	Effect of humidity on fatigue properties of shot-peened High Strength Al Alloy
	16:05 - 16:30			F. Pastorek University of _ilina, Slovak Republic	B. Hadzima, M. Mhaede, M. Wollmann, L. Wagner	Corrosion behaviour of shot peened AZ31 Mg alloy
	16:30 - 16:55			A. Ahmed TU Clausthal, Germany	M. Mhaede, M. Wollmann, L. Wagner	Effects of shot peening on the corrosion behavior of coated AISI 316
	16:55 - 17:20			Y. Kobayashi SINTOKOGIO,LTD, Japan	A. Matsui	Shot peening to prevent cracking in the water cooling hole of die-casting die
Poster	17:20 - 18:00	Marmorsaal
Banquet	19:00	Großer Saal	Dr. Niku-Lari, Dinner Speech " From Las Vegas to Goslar"