12th International Conference on Shot Peening
Goslar, Germany, September 15-18, 2014ICSP-12 banner

Program Schedule: Tuesday, September 16

 
Tuesday, 16.09.2014
Session Time Room Moderator Presenter Co-authors Title
Keynote Lecture 09:00 - 09:45 Großer Saal L. Wagner V. Schulze
Karlsruhe Institute of Technology, Germany
A. Klumpp, J. Hoffmeister Mechanical Surface Treatments
1A 09:50 - 10:15 Großer Saal M. Wollmann A. Zammit
University of Malta, Malta
S. Abela, R. Michalczewski, M. Kalbarczyk, L. Wagner, M. Mhaede, R. Wan, M. Grech Influence of shot peening on the rolling contact fatigue resistance of Cu-Ni austempered ductile iron
10:15 - 10:40 M. Guagliano
Politecnico di Milano, Italy
S. Bagherifard, M. Bandini, C. Morel, J. Samuel Fatigue strength of a low alloy steel shot peened with ultra fine hard media
1B 09:50 - 10:15 Marmorsaal L. Wagner J.-C. Kim Kyushu
University, Japan
S.-K. Cheong, H. Noguchi Investigation of fatigue crack growth behavior on the shot-peened carbon steel by residual stress relaxation
10:15 - 10:40 J. Hoffmeister
Karlsruhe Institute of Technology, Germany
V. Schulze Residual stress relaxation induced by shot peening in different materials after quasi-static loading
1C 09:50 - 10:15 Turmsaal B. Eigenmann H.Y. Miao
École Polytechnique de Montréal, Canada
R. Lebon,M. Lévesque, P. Bocher Residual stress measurement correction on shot peened AA2024 by finite element analysis
10:15 - 10:40 C. Jiang
Shanghai Jiatong University, China
Q. Feng, Q. Wang X-ray Diffraction riveted analysis of shot-peened duplex stainless steel during isothermal annealing
Coffee Break 10:40 - 11:00  
2A 11:00 - 11:25 Großer Saal J. Cammet H. J. C. Voorwald
State University of São Paulo, Brazil
T. A. Minto,M. Y. Pitanga, M. C. Fonseca Influence of shot peening on the fatigue resistance of sulfuric anodized AA 7175-T74
11:25 - 11:50 H. Soyama
Tohoku University, Japan
  Improvement of threshold stress intensity factor range of stainless steel by cavitation peening
11:50 -12:15 C. Müller
TU Darmstadt, Germany
J. Schuster Shot peening of ultrafine grained (UFG) microstructures
12:15 - 12:40 Q. Wang Shanghai Jiatong University, China Q. Feng, C. Jiang Recrystallizations of surface deformation layer of 18CrNiMo7-6 steel after shot peening during isothermal annealing
2B 11:00 - 11:25 Marmorsaal L. Wagner O. Higounenc
Metal Improvement Company, France
  Laser peening vs. shot peening: engineering of residual stresses, surface roughness and cold working
11:25 - 11:50 J. Epp Stiftung
Institut für Werkstofftechnik, Bremen, Germany
H. W. Zoch
Comparison of water-jet peening and laser shock peening with shot peening for the improvement of fatigue properties of carburized steel gears
11:50 -12:15 D. Retraint
Université de Technologie de Troyes, France
D. Gallitelli, E. Rouhaud Comparison between conventional shot peening (SP) and surface mechanical attrition treatments (SMAT) on the induced superficial mechanical properties of Titanium alloy
12:15 - 12:40 M. Ramulu
University of Washington, USA
  Assessment of field surface treatments for prolonging the life of steel welded joints subjected to fatigue loading
2C 11:00 - 11:25 Turmsaal V. Schulze U. Kletzin
TU Ilmenau, Germany
  Finite element simulation of shot peening on spring steel wire
11:25 - 11:50 M. Lévesque
École Polytechnique de Montréal, Canada
H. Y. Miao, A. Gariépy, A. Levers Prediction of shot peen forming through direct finite element simulation
11:50 -12:15 V. Hardenacke
Fraunhofer IWM, Freiburg, Germany
M. Farajian, D. Siegele Simulation of the high frequency hammer peening process for improving the fatigue performance of welded joints
12:15 - 12:40 Y. J. Wang
Northwestern Polytechnical University, China
X. D. Xiao, J. B. Wang, W. Zhang, M. J. Qiao Finite element simulation on shot peen forming the wing panel of commercial aircraft C919
Lunch 12:40 - 13:40 Clubraum (Frˆºhstˆºcksrestaurant), Altdeutsche Stuben, Maximilian
3A 13:40 - 14:05 Großer Saal E. Müller J. Sakamoto
Seoul National University of Science and Technology, Korea
  Effect of FIB-processed sharp flaw on fatigue limit of shot peened medium carbon steel
14:05 - 14:30 R. L. Peng
Linköping University, Sweden
T. Vuoristo, D. Bäckström, M. Ahmad, M. Lundberg, S. Johansson Fatigue strength of shot peened compacted graphite iron
14:30 - 14:55 X. Chen
Shanghai Jiatong University, China
P. Fu, C. Jiang Microstructure changes and stress relaxation of 18CrNiMo7-6 steel after multi-step shot peening during isothermal annealing
14:55 - 15:20 S. Ikeda
SINTOKOGIO,LTD., JAPAN
A. Matsui, Y. Kobayashi, M. Enoki Evaluation of shot peening by AE method
3B 13:40 - 14:05 Marmorsaal H. Polanetzki R. Weingärtner
Karlsruhe Institute of Technology, Germany
J. Hoffmeister, V. Schulze Investigation on the mechanisms improving fatigue strength in surface layers after micropeening
14:05 - 14:30 Y. Watanabe
TOYO SEIKO. CO., LTD, Japan
K. Hattori, M. Yamawaki, Y. Kobayashi, K. Ito Novel system for potential non-destructive material inspection using positron annihilation lifetime spectroscopy on shot peened parts
14:30 - 14:55 H. Pan
EPCO Testing Technology, China
Q. Feng, C. Jiang Effects of shot peening on surface mechanical properties of duplex stainless steel
14:55 - 15:20 W. Hennig
Rolls-Royce, Deutschland
T. Haubold A shot peening method for aerofoil treatment of blisk assemblies
3C 13:40 - 14:05 Turmsaal V. Schulze A. Lim
Nanyang Technological University, Singapore
S. Castagne, C. C. Wong Effect of friction coefficient on finite element modelling of deep cold rolling
14:05 - 14:30 A. Toufayli
Mines ParisTech, CEMEF, France
P.-O. Bouchard, M. Bernacki Shot peening of surface irregularities: numerical modelling and influence on fatigue properties
14:30 - 14:55 A. Erz
Karlsruhe Institute of Technology, Germany
J. Hoffmeister, V. Schulze Numerical simulation of micropeening of quenched and tempered AISI 4140
14:55 - 15:20 M. Farajian
Fraunhofer IWM, Freiburg, Germany
V. Hardenacke, M. Klaus, W. Pfeiffer, D. Siegele Numerical studies of shot peening of high strength steels and the related experimental investigations by means of hole drilling, X-ray and synchrotron diffraction analysis
Coffee Break 15:20 - 15:40          
4A 15:40 - 16:05 Großer Saal M. Mhaede K. Masaki
Okinawa National College of Technology, JAPAN
N. Hisamori, Y. Kobayashi, D. Gowa Effects of zirconia shot peening on high cycle fatigue properties of Ti-6Al-4V alloy
16:05 - 16:30 Q. Liu
Defence Science and Technology Organisation (DSTO), Australia
P. S. Baburamani, P. K. Sharp The effect of partial and re-work peening on the fatigue life of 7050-T7451 aluminium alloy
16:30 - 16:55 N. Tanuma
SINTOKOGIO,LTD., JAPAN
D. Gowa, Y. Kobayashi Low velocity shot peening condition by high hardness CCW
4B 15:40 - 16:05 Marmorsaal M. Ramulu K. Nambu
Suzuka National College of Technology, JAPAN
Y. Shimizu

Clarification of the influence factor to the surface modification effect by fine particle peening
16:05 - 16:30 S. Yang
TU Clausthal, Germany
L. Wagner HCF performance of the shot peened near-beta titanium alloy Ti-6246 - effects of test temperature and environment
16:30 - 16:55 B. Eigenmann
X-Ray and Materials Laboratory Eigenmann, Germany
A. Lau, A. Kiefer Shot peening of high quality case hardening steel - process parameters and process limits
4C 15:40 - 16:05 Turmsaal W. Zinn J. Badreddine
University of Technology of Troyes, France
M. Micoulaut, S. Remy, E. Rouhaud, P. Renaud, F. Chateau, V. Desfontaine A model for ultrasonic shot peening: optimization of chamber design in an industrial context
16:05 - 16:30 E. Rouhaud
University of Technology of Troyes, France
D. Gallitelli, D. Retraint, J. Badreddine, C. Labergere, M. Francois From process parameters to residual stress field: complete ultrasonic shot peening simulation
16:30 - 16:55 X. D. Xiao
Northwestern Polytechnical University, China
Y. J. Wang, J. B. Wang, S. M. Wie An analytical approach to relate shot peen forming parameters to resulting curvature with expanding cavity model
ISCSP Meeting 18:00 Raum Mönchehaus