Controlled Rotary Flap Peening for Repair Applications |
S. Forgues, B. Labelle, M. King, N. Manor |
2011000 |
Effect of shot peening on the fatigue life and crack propagation prediction with experiments and Navarro-Rios Model |
H.Y. Miao and M. L |
2011001 |
Fatigue Life Enhancement of Welded Structures using Ultrasonic Needle Peening |
Desfontaine, Montherat, Chateau, Briere |
2011002 |
Implementation of velocity measurement as intensity verification in production |
A.M. K |
2011003 |
Manual shot peening intensity and coverage effects on fatigue performance of aluminum alloy |
H. Diep, H. Bae, and M. Ramulu |
2011004 |
Enhancement of High Strength Steel Endurance, Application to Automotive Transmission Components Using a New Type of Ceramic S |
F-X Abadie, G.P. Marconi, E. Morgano |
2011005 |
Improvement of the Heat Checking Resistance of Casting Dies by Shot-Peening |
Oyama, Kobayashi, Kitagawa, Yokio and Hiraoka |
2011006 |
Integration of a Deep Rolling Process in the Heat Treatment of SAE1045 Steel: a Way to Reduce and Optimize the Production Cha |
A. Cherif, W. Zinn, B. Scholtes |
2011007 |
Investigation for Different Peening Techniques on Residual Stress Field of SiCw/Al Composite |
Junjie Huang, Chuanhai Jiang, Xiaohu Chen |
2011008 |
SHOT PEENING CONDITIONS AND PROCESSING PROPERTIES FOR SPRING STEEL |
I. Sumiyoshi, A. Tange, H. Okada |
2011009 |
The Effects of Ultrasound-Aided Deep Rolling Process on Fatigue Enhancement of 30CrMnSiNi2A Steel |
J.F. Xie, Y.L. Zhu, Y.L. Huang |
2011010 |
3D FE analysis of shotpeening process for simulation and research on shotpeening process parameters |
A. Manoucherifar and K. Rezvani |
2011011 |
A comprehensive stream analysis and a numerical simulation of shot peening for the prediction of representative impact patter |
G.I. Mylonas and G.N. Labeas |
2011012 |
Effect of Shot Peening on Surface Texture and Surface Integrity |
K. Tosha |
2011013 |
Effect of SMAT Parameters on Microstructural Features using DOE Technique |
Chemkhi, Retraint, Montay, Garnier, Belahcene |
2011014 |
Fatigue analysis of shot peened smooth and notched steel specimens |
Bagherifard, Pariente, Guagliano and Bandini |
2011015 |
Impact velocity and distribution in ultrasonic shot peening |
Badreddine, Micoulaut, Rouhaud, Retraint, Francois |
2011016 |
Modeling of Shot Peening Residual Stresses with a Generalized J2 Plasticity Theory |
J. Davis and M. Ramulu |
2011017 |
Modified Symmetry Cell Approach for Simulation of Surface Enhancement Over Large Scale Structures |
T. Spradlin, R. Grandhi and K. Langer |
2011018 |
Numerical analysis of shot peening effects on the fatigue life |
H. Bae, M. Ramulu, B. Flinn and H. Diep |
2011019 |
Application of the FEM for the Prediction of the Micro-region Stress of TiB2/Al Composite |
J. Huang, K. Bian, C. Jiang, Q. Wang |
2011020 |
Effect of Injection Pressure and Size of Nozzle Throat of a Cavitating Jet on Cavitation Peening |
H. Soyama, O. Takakuwa and A. Naito |
2011021 |
Shot Peening Optimization using the Discrete Element Method |
K. Murugaratnam and S. Utili |
2011022 |
XRD Investigation of Thermal Relaxation Behavior of Microstructure in TiB2/Al Deformation Layer Introduced by Shot Peening |
W. Luan, C. Jiang, X. Chen |
2011023 |
Residual Stress Distribution in Alpha and Beta Phases of Mechanically Surface Treated TIMETAL LCB Determined by Energy-Disper |
Maawad, Brokmeier, Wagner, Genzel, Klaus |
2011024 |
Residual stress measurement in carbonitrided shot-peened steel using the incremental groove machining coupled with speckle pa |
Van Wijk, Francois, Frabolot, Sura, Ghodhbani |
2011025 |
Influences of Mechanical Properties and Retained Austenite Content on Shot-peening Characteristics |
Tsuji, Kobayashi, Ishikura, Inoue |
2011026 |
THEORETICAL AND EXPERIMENTAL STUDY OF COVERAGE IN MANUAL SHOT PEENING |
Davis, Bae, Ramulu |
2011027 |
Application of UNSM (Ultrasonic Nanocrystal Surface Modification) Technology for Prolonging the Service life of AISI 1045 She |
Pyoun, Cho, Suh, Park, Rogers, Kayumov, Murakami |
2011028 |
Effects of Shot Peening on High Cycle Fatigue Behavior of Powder Metallurgy and Conventional forms of a Medium Carbon Steel |
M.M.Mirzazadeh |
2011029 |
Influence of shot peening on fatigue durability of decarburized spring steels |
Dalaei, Hoijer, Akerstrom, Karlsson |
2011030 |
The Prediction of Fatigue Strength for Shot-peened Materials by Fracture Mechanics |
Akira Tange |
2011031 |
Residual Stress Enhancement of X-2M Foreign Object Damage Tolerance |
VanDalen, Hopkins, Hill |
2011032 |
Effects of the surface treatment on the measured diffraction peak width of Inconel 718 |
Hoffmeister, Schulze, Hessert, Koenig |
2011033 |
Enhanced Mechanical Characteristics of Metal Alloys by the Ultrasonic Nanocrystal Surface Modification |
Pyoun, Suh, Cho, Kim, Amanov |
2011034 |
Influence of Mechanical Surface Strengthening on Nickel-base Superalloy DA718 |
Ehrl, Planetzki, Hesser, Wagner |
2011035 |
Reliability evaluation for shot peened specimen of the aircraft components manufactured Al7075-T6 by accelerated life tests |
Kim, Nam, Kang, Cheong |
2011036 |
Residual stress relaxation induced by shot peening in Inconel |
Hoffmesiter, Schulze, Hessert, Koenig |
2011037 |
Application of Ultrasonic Nanocrystalline Surface Modification Technology for Prolonging the Service Life of Double Row Angul |
Cho, Amanov, Cho, Pyun |
2011038 |
Fabrication and Characterization of Bulk Nanocrystalline Layer on the Aluminum 6061 Surface by Shot Peening (SP) |
Waikar, Guo |
2011039 |
Numerical model of severe shot peening aimed to estimate surface nanocrystallization of Al material |
Bagherifard, Ghelichi, Guagliano |
2011040 |
Influence of Work Hardening and Residual Stress Induced by Shot Peening on Pitting Strength |
Ishikura, Inoue, Kobayashi, Tsuji |
2011041 |
Considering Environmental and Mean Stress Effects in Understanding HCF Performance of Mechanically Surface Treated Metallic M |
Zay, Mhaede, Wollmann, Wagner |
2011042 |
Development of Rework Procedure for AA7076-T6 P-3/C-130 Propeller Taper Bore Using Low Plasticity Burnishing (LPB) |
Hornbach, Scheel, Prevey |
2011043 |
Mitigation of Stress Corrosion Cracking Using an Engineered Residual Stress Solution |
Scheel, Hornbach, Prevey |
2011045 |
Influence of Isothermal Annealing on Stress Relaxation of Shot Peened SiCw/Al Composite |
Huang, Jiang, Wang |
2011046 |
Effect of Austenite Stability on Phase Transformation and Fatigue Performance of Stainless Steels after Various Mechanical Su |
Wollmann, Mhaede, Wanger |
2011047 |
Effect of Coverage in Ball-Burnishing on Fatigue Performance of Al2024-T4 |
Mhaede, Wagner |
2011048 |
Fatigue Performance of Al7075-T73 and Ti-6Al-4V: Comparing Results after Shot Peening, Laser Shock Peening and Ball-Burnishin |
Mhaede, Sano, Altenberger, Wagner |
2011049 |
Shot Peening and Ball-Burnishing to Improve HCF Strength of the New Titanium Alloy TIMETAL-54M |
Zay, Shan, Kosaka, Wagner |
2011050 |
Influence of different Surface Enhancement Processes on Mechanical Properties of the Titanium Alloy Ti6246 |
Polanetzki, Ehrl, Stoll, Wagner |
2011051 |
Effects of Severe Plastic Bulk and Surface Deformations on Fatigue Performance of cp-Cu |
Sin, Janecek, Wollmann, Wagner |
2011052 |
Effect of heat treatment on friction properties of functional graded materials fabricated by fine particle peening |
Ando, Usami |
2011053 |
The effect of fine particle shot peening on the rolling contact fatigue strength |
Kobayashi, Daisuke, Seki, Lei |
2011054 |
Compressive Residual Stress Optimization in Laser Peening of a Curved Geometry |
Vasu, Grandhi |
2011055 |
EFFECTS OF LASER PEENING ON FATIGUE LIFE IN AN ARRESTMENT HOOK SHANK APPLICATION FOR NAVAL AIRCRAFT* |
Leap, Rankin, Harrison, Hackel, Nemeth, Candela |
2011056 |
Experimental Investigation on the Bending Deformation of thin 1060 Pure Aluminum Sheet by Laser Peen Forming |
Hu, Yao, Xu |
2011057 |
Influence of Laser Peening (LP) and Shot Peening (SP) on Fretting Fatigue Life under Spherical Contact |
Valeo, Thieuleux, Pintado, Abascal |
2011058 |
LASER PEENING FOR PREVENTION OF FATIGUE FAILURES |
Lahrman, Gaydos |
2011059 |
Predictive Self-closed Modeling of Laser Shock Peening and Parametric Study |
Cao, Shin |
2011060 |
The Effect of Frozen Ultrasonic Shot Peening Treatment on Two Way Characteristic at Shape Memory Alloy |
Watanabe, Hattori, Handa, Yoshimi, Ikeda, Fujii |
2011061 |
Ultrasonic Shot Peening (USP) on Ti-6Al-4V and Ti-6Al-2Sn-4Zr-6Mo Aero Engine Components |
Stoll, Helm, Polanetzki, Wagner |
2011062 |
The Method Of Corrective Shot Peening : How To Correct The Distortion On The Machined Parts |
Sutarno, Munthe |
2011063 |
Application of UNSM (ultrasonic nanocrystal surface modification) technology for increasing fatigue strength of Ti-6Al-4V ELI |
Pyoun, Suh, Cho, Lee, Ahn, Cherif, Scholtes, Kayum |
2011064 |
Decreased Bacteria Functions on Shot Peened Titanium |
Gorth, Webster, Derda, Champaigne |
2011065 |
Application of UNSM (Ultrasonic Nanocrystal Surface Modification) Technology for Prolonging Service Life of Journal Bearing o |
Amanov, Cho, Kim, Pyun |
2011066 |
Effects of fluid condition and material on surface damage in ultrasonic wet peening |
Weingaertner, Kienzler, Hoffmeister, Schulze |
2011067 |
Influence of shot peening and superfinishing on gears as a repair tool of damaged faces of teeth generated by overheating whe |
Kritzler |
2011068 |
On the potential application of a numerical optimization of fatigue life with DoE and FEM |
Miao, Levesque |
2011069 |
Peening Process Characterization and Optimization |
Young |
2011070 |
Comparing Fatigue Notch Sensitivities of Various Alloys Before and After Mechanical Surface Treating |
Wollmann, Atoura, Mhaede, Wagner |
2011071 |
The recent developments of shot peening in China |
Xu, Jiang, Wang |
2011072 |
Shot Peening |
Lu |
2011073 |
The Effect of Shot Peening on Tribological Behavior of Alloyed Steels |
Babic, Mitrovic, Adamovic, Dzunic, Zivic |
2011074 |
Adaptation of Shot Peen Parameters for Gear Geometry |
Breuer, Matlock |
2011075 |
Increasing of Contact Fatigue Strength by Nitriding and Shot-Peening Treatment |
Nakonieczny, Monka |
2011076 |