Conference Hall Map

map
click to enlarge

Program Schedule by Paper/Author

Click on column header to resort.
Please note: Sessions and times are subject to change.

Forgues, Sylvain Controlled Rotary Flap Peening for Repair Applications 001 1.1 Session 2A
Tues., 10:30-12:00
Bendix Theater
Miao, Honyan On the potential application of a numerical optimization of fatigue life with DoE and FEM 004 1.2 Session 2A
Tues., 10:30-12:00
Bendix Theater
Chateau, Frederic Fatigue life enhancement of welded structures using ultrasonic needle peening 073 1.2 Session 9A
Thurs., 8:30-10:00
Bendix Theater
Konitzer, Martin Implementation of velocity measurement as intensity verification in serial production 103 1.3 Session 9A
Thurs., 8:30-10:00
Bendix Theater
Sumiyoshi, Isao Shot Peening Conditions and Processing Properities for Spring Steel 008 1.4 Session 5A
Wed., 8:30-10:00
Bendix Theater
Zinn, Wolfgang Integration of a deep rolling process in the heat treatment of SAE1045 Steel: a way to reduce and optimize the production chain. 009 1.4 Session 5A
Wed., 8:30-10:00
Bendix Theater
Oyama, Tadanobu Improvement of the Heat Checking Resistance of Casting Dies by Shot-Peening 012 1.4 Session 9A
Thurs., 8:30-10:00
Bendix Theater
Jiang, Chuanhai Investigation for Different Peening Techniques on Residual Stress Field of SiCw/Al Composite 013 1.4 Session 2A
Tues., 10:30-12:00
Bendix Theater
Abadie, F-Xavier Enhancement of high strength steel endurance, application to automotive transmission components using a new type of ceramic shot 014 1.4 Session 5A
Wed., 8:30-10:00
Bendix Theater
Bae, Heechang Manual shot peening intensity and coverage effects on fatigue performance of aluminum alloy 101 1.4 Session 5A
Wed., 8:30-10:00
Bendix Theater
Fernandez-Pariente, Ines Fatigue analysis of shot peened smooth and notched steel specimens 016 2.1 Session 3A
Tues., 1:30-3:00
Bendix Theater
Tosha, Katsuji Effect of shot peening on surface texture and surface integrity 017 2.1 Session 3A
Tues., 1:30-3:00
Bendix Theater
Badreddine, Jawad Impact velocity and distribution in ultrasonic shot peening 020 2.1 Session 6A
Wed., 10:30-12:00
Bendix Theater
Davis, Julio Modeling of Shot Peening Residual Stresses with a Generalized J2 Plasticity Theory 021 2.1 Session 6A
Wed., 10:30-12:00
Bendix Theater
, 3D FE analysis of shotpeening process for simulation and research on shotpeening process parameters 026 2.1 Session A
Wed., 7:00-7:00
Bendix Theater
Mylonas, Georgios A comprehensive stream analysis and a numerical simulation of shot peening for the prediction of corresponding products 027 2.1 Session A
Wed., 7:00-7:00
Bendix Theater
Spradlin, Thomas J. Modified symmetry cell approach for simulation of surface enhancement over large scale structures 028 2.1 Session 6A
Wed., 10:30-12:00
Bendix Theater
Chemkhi, Mahdi Effect of SMAT parameters on microstructural features using DOE technique 072 2.1 Session 10A
Thurs., 10:30-12:00
Bendix Theater
Bae, Heechang Numerical analysis of shot peening effects on the fatigue life of a titanium alloy 102 2.1 Session 9A
Thurs., 8:30-10:00
Bendix Theater
Soyama, Hitoshi Effect of injection pressure and size of nozzle throat of a cavitating jet on cavitation peening 030 2.2 Session 6A
Wed., 10:30-12:00
Bendix Theater
Xu, Hanqin Application of the FEM for the prediction of the Micro-region Stress of TiB2/Al Composite 031 2.2 Session 10A
Thurs., 10:30-12:00
Bendix Theater
Murugaratnam, Kovthaman Shot Peening Optimization using the Discrete Element Method 108 2.2 Session 10A
Thurs., 10:30-12:00
Bendix Theater
Jiang, Chuanhai XRD investigation of thermal relaxation behavior of microstructure in TiB2/Al deformation layer introduced by shot peening 033 3.1 Session 5B
Wed., 8:30-10:00
Recital Hall
Van Wijk, Song Residual stress measurement in carbonitrided shot-peened steel using the incremental groove machining coupled with speckle pattern interferometry 099 3.3 Session 5B
Wed., 8:30-10:00
Recital Hall
Tsuji, Toshiya Influences of mechanical properties and retained austenite content on shot-peening characteristics 035 3.4 Session 5B
Wed., 8:30-10:00
Recital Hall
Davis, Julio Theoretical And Experimental Study Of Coverage In Manual Shot Peening 036 3.4 Session 5B
Wed., 8:30-10:00
Recital Hall
Kayumov, Ravil Application of UNSM (ultrasonic nano crystal surface modification) technology for prolonging the service life of AISI 1045 shear pin in the flange yoke assembly of stainless hot rolling mill 039 5.1 Session 8A
Wed., 3:30-5:00
Bendix Theater
Dalaei, Kamellia Influence of shot peening on fatigue durability of decarburized spring steels 040 5.1 Session 8A
Wed., 3:30-5:00
Bendix Theater
Mirzazadeh, Mohammad Effects of Shot Peening on High Cycle Fatigue Behavior of Powder Metallurgy and Conventional forms of a Medium Carbon Steel 041 5.1 Session A
Wed., 7:00-7:00
Bendix Theater
Tange, Akira The prediction of fatigue strength for shot-peened materials by fracture mechanics 042 5.1 Session 8A
Wed., 3:30-5:00
Bendix Theater
Hill, Michael Residual Stress Enhancement of X-2M Foreign Object Damage Tolerance 107 5.1 Session 4A
Tues., 3:30-5:00
Bendix Theater
Schulze, Volker Effects of the surface treatment on the measured diffraction peak width of Inconel 718 043 5.2 Session 3A
Tues., 1:30-3:00
Bendix Theater
Pyun, Young Sik Enhanced mechanical characteristics of metal alloys by the ultrasonic nanocrystal surface modification 044 5.2 Session 4A
Tues., 3:30-5:00
Bendix Theater
Hoffmeister, Juergen Residual stress relaxation induced by shot peening in Inconel 718 under quasi-static and cyclic loading 046 5.2 Session 4A
Tues., 3:30-5:00
Bendix Theater
Ehrl, Janne Influence of mechanical surface strengthening on nickel-base superalloy DA718 047 5.2 Session 4A
Tues., 3:30-5:00
Bendix Theater
Kim, Jong-Cheon Reliability evaluation of shot peened Al7075-T6 specimen for aircraft components by accelerated life test 048 5.2 Session 8A
Wed., 3:30-5:00
Bendix Theater
Cho, In Ho Application of Ultrasonic Nanocrystalline Surface Modification technology for prolonging the service life of double row angular contact bearings and for reducing friction loss 049 5.3 Session 3A
Tues., 1:30-3:00
Bendix Theater
Guagliano, Mario Numerical model of severe shot peening aimed to estimate surface nanocrystallization of Al material 050 5.3 Session 7A
Wed., 1:30-3:00
Bendix Theater
Guo, Yuebin Fabrication and characterization of bulk nanocrystalline layer on the aluminum 6061 surface by shot peening (SP) 051 5.3 Session 4B
Tues., 3:30-5:00
Recital Hall
Ishikura, Ryohei Influence of work hardening and residual stress induced by shot peening on pitting strength 052 6.1 Session 3B
Tues., 1:30-3:00
Recital Hall
Timmermann, Klaus Effects of shot peening treatments on corrosion fatigue of cast or wrought Al-base alloys 045 6.2 Session 7A
Wed., 1:30-3:00
Bendix Theater
Hornbach, Doug Development of rework procedure for AA7076-T6 P-3/C-130 propeller taper bore using low plasticity burnishing (LPB) 054 6.2 Session 3B
Tues., 1:30-3:00
Recital Hall
Scheel, Jeremy Mitigation of stress corrosion cracking using an engineered residual stress solution 055 6.2 Session 3B
Tues., 1:30-3:00
Recital Hall
Khu, Keynes Influence of Isothermal Annealing on Stress Relaxation of Shot Peened SiCw/Al Composite 056 7.2 Session 8A
Wed., 3:30-5:00
Bendix Theater
Wagner, Lothar Shot peening and ball-burnishing to improve HCF strength of the new titanium alloy TIMETAL-54M 057 8.1 Session 4B
Tues., 3:30-5:00
Recital Hall
Polanetzki, Holger Influence of different surface enhancement processes on mechanical properties of the titanium alloy Ti6246 059 8.1 Session 4B
Tues., 3:30-5:00
Recital Hall
Wagner, Lothar Fatigue Performance of Al7075-T73 and Ti-6Al-4V: Comparing Results after Shot Peening, Laser Shock Peening and Ball-Burnishing 060 8.1 Session 4B
Tues., 3:30-5:00
Recital Hall
Wagner, Lothar Effects of severe plastic bulk and surface deformations on fatigue performance of Cp-Cu 062 8.1 Session 3B
Tues., 1:30-3:00
Recital Hall
Wagner, Lothar Effect of coverage in ball-burnishing on fatigue performance of Al2024-T4 063 8.1 Session 6B
Wed., 10:30-12:00
Recital Hall
Ando, Masafumi Effect of heat treatment on friction properties of functional graded materials fabricated by fine particle peening 065 8.2 Session 6B
Wed., 10:30-12:00
Recital Hall
Kobayashi, Yuji The effect of fine particle shot peening on the rolling contact fatigue strength 066 8.2 Session 6B
Wed., 10:30-12:00
Recital Hall
Cao, Yunfeng Predictive self-closed modeling of laser shock peening and parametric study 067 8.3 Session 7B
Wed., 1:30-3:00
Recital Hall
Harrison, James Effects of laser peening on fatigue life in an arrestment hook shank application for naval aircraft 069 8.3 Session 7B
Wed., 1:30-3:00
Recital Hall
Lahrman, David Laser Peening for Prevention of Fatique Failures 070 8.3 Session 10A
Thurs., 10:30-12:00
Bendix Theater
Thieuleux, Jean-Yves Influence of laser peening (LP) and shot peening (SP) on fretting fatigue life under spherical contact 098 8.3 Session 7B
Wed., 1:30-3:00
Recital Hall
Hu, Yongxiang Experimental Investigation on the Bending Deformation of thin 1060 Pure Aluminum Sheet by Laser Peen Forming 106 8.3 Session 2B
Tues., 10:30-12:00
Recital Hall
Vasu, Anoop Compressive Residual Stress Optimization in Laser Peening of a Curved Geometry 105 8.3 Session 2B
Tues., 10:30-12:00
Recital Hall
TBA (Xie, Jun Feng; Zhu, You Li; Huang, Yuan Lin) The effects of ulrasonic-aided deep rolling process on fatigue performance of 30CrMnSiNi2A steel 010 8.4 Session B
Tues., 7:00-7:00
Recital Hall
Polanetzki, Holger Ultrasonic Shot Peening (USP) for Ti-6Al-4V and Ti-6Al-2Sn-4Zr-6Mo aero engine components 071 8.4 Session 6B
Wed., 10:30-12:00
Recital Hall
Watanabe, Yoshihiro The effect of Frozen Ultrasonic Shot Peening Treatment on two way characteristic at Shape Memory Alloy 074 8.4 Session 2B
Tues., 10:30-12:00
Recital Hall
Munthe, Maris The method of corrective shot peening: how to correct the distortion on the machined parts 076 8.6 Session B
Tues., 7:00-7:00
Recital Hall
Webster, Tom Decreased Bacteria Functions on Shot Peened Titanium 082 8.7 Session 2A
Tues., 10:30-12:00
Bendix Theater
Weingaertner, Regina Effects of fluid condition and material on surface damage in ultrasonic wet peening 077 8.8 Session 7B
Wed., 1:30-3:00
Recital Hall
Nakonieczny, Aleksander Increasing of the contact fatigue strength by nitriding and shot-peening treatment 087 8.8 Session 2B
Tues., 10:30-12:00
Recital Hall
Kritzler, Jurgen Influence of shot peening and superfinishing on gears as a repair tool of damaged faces of teeth generated by overheating when grinding. 078 9.1 Session 8B
Wed., 3:30-5:00
Recital Hall
Miao, Honyan On the potential application of a numerical optimization of fatigue life with DoE and FEM 029 9.3 Session 8B
Wed., 3:30-5:00
Recital Hall
Young, Kevin Peening process characterization and optimization 079 9.3 Session 8B
Wed., 3:30-5:00
Recital Hall
Jiang, Chuanhai The recent developments of shot peening in China 080 9.4 Session 8B
Wed., 3:30-5:00
Recital Hall
Wagner, Lothar Comparing fatigue notch sensitivities of various alloys before and after mechanical surface treating 081 9.4 Session 8B
Wed., 3:30-5:00
Recital Hall
Babic, M. The effect of shot peening on tribological behavior of alloyed steels 083 10.1 Session B
Wed., 7:00-7:00
Recital Hall
Lu, Xiaobin Shot Peening - A Tribological Approach 084 10.1 Session 7A
Wed., 1:30-3:00
Bendix Theater
Breuer, David Adaptation of Shot Peen Parameters for Gear Geometry 085 10.2 Session 7A
Wed., 1:30-3:00
Bendix Theater
Bailey, Pete Linear Motion Peening 002 Poster Discovery Ballroom
Derda, Jeff A new sub-size strip for intensity determination in difficult locations 006 Poster Discovery Ballroom
, Prediction of Peening Residual Stress Using a 3D FE Model under Multi-shot Oblique Impacts 022 Poster Discovery Ballroom
, A 3D FE Model with Plastic Shots for Evaluation of Residual Stress under Oblique Shot Peening in AISI4340 Steel 023 Poster Discovery Ballroom
Wagner, Lothar Stress distribution in alpha and beta phases of mechanically surface treated TIMETAL LCB determined by energy-dispersive X-ray diffraction 032 Poster Discovery Ballroom
Wagner, Lothar Considering environmental and mean stress effects in understanding HCF performance of mechanically surface treated metallic materials 053 Poster Discovery Ballroom
Wagner, Lothar Effect of austenite stability on phase transformation and fatigue performance of stainless steels after various mechanical surface treatments 058 Poster Discovery Ballroom
, Comparison of the different stress distributions by stress rolling of spring steel 064 Poster Discovery Ballroom
Balan, Kumar Composites & the future of shot peening 089 Poster Discovery Ballroom
Derda, Jeff Almen Strip saturation and coverage, which happens first? 090 Poster Discovery Ballroom
Derda, Jeff Performance testing of Almen strips to demonstrate consistency 091 Poster Discovery Ballroom
Derda, Jeff Ratio of various thickness Almen strip arc heights 092 Poster Discovery Ballroom
, Application of micro-peening to aluminum alloy with a small u-notch for improving fatigue life 094 Poster Discovery Ballroom
, Effect of shot peening on the fatigue life of welded aluminum alloy. 095 Poster Discovery Ballroom
TBA (Pyoun, Y.S.; Suh, C.M.; Cho, I.H.; Lee, K.Y.; Ahn, S.Y; Cherif, A; Scholtes, B.; Kayumov, R.) Application of UNSM (ultrasonic nanocrystal surface modification) technology for increasing fatigue strength of Ti6Al4V ELI spine rod and for decreasing 15% of the spine rod diameter 097 Poster Discovery Ballroom
TBA (Amanov, Auezhan; Cho, In Ho; Kim, Joon Hyong; Pyun, Young Sik) Application of UNSM (Ultrasonic Nanocrystal Surface Modification) technology for prolonging the service life of journal bearing of railroad axle and for reducing friction loss 100 Poster Discovery Ballroom
88 Records Total