2002002
|
The Application of Mechanical Surface Treatment in the Passenger Car
Industry
Peter Hutmann, BMW Group, Munich, Germany |
2002003
|
Life Enhancement of Aero Engine Components by Shot Peening:
Opportunities and Risks
Gerhard W. Konig, MTU Aero Engines, Munich,
German |
2002004
|
Study on Methodology to Increase Fatigue Limit of Gears
Ando (1),
Matsui (2) and Eto (2) |
2002005
|
Searching for the Most Suitable Condition and the Suggestion of Each
Application in Ultrasonic Shot Peening
Hattori, Watanabe, Handa,
Duchazeaubeneix |
2002006
|
Consideration of Shot Peening Treatment Applied to a High Strength
Aeronautical Steel with Different Hardnesses
Torres(1), Nascimento(2),
Voorwald(2) |
2002007
|
Towards Peen Forming Process Automation
Wustefeld, Linnemann,
Kittel |
2002008
|
Current Applications of Advanced Peen Forming
Implementation
Friese, Lohmar, Wustefeld |
2002009
|
The Unsatisfactory Situation in Residual Stress Evaluation
Rudolf
G. Bosshard |
2002010
|
Vacuum-Suction Peening: A Novel Method for Emission-Free Shot
Peening
Pieper and Ruhland |
2002011
|
New Developments in Cut Wire Shot for Shot Peening
Uwe Kersching,
R+K Draht GmbH, Mittweida, Germany |
2002012
|
Virtues & Limitations of Almen Round
Sharma,
Deo,Suresh,Bosshard |
2002013
|
Device for the Determination of Impact Velocities in Shot
Peening
Clausen, Stangenberg |
2002014
|
Effective Use of Fluorescent Tracers for Peening Coverage
Peter
Bailey, Electronics Inc., Cincinnati, OH, US |
2002015
|
A Theoretical and Experimental Investigation into the Development of
Coverage in Shot Peening
Karuppanan, Romero, de los Rios, Rodopoulos,
Lever |
2002016
|
Almen Gage Calibration
Champaigne |
2002017
|
Performance of Almen Strips which are Straightened after
Tempering
Champaigne |
2002018
|
Optimization of the Shot Peening Parameters
Petit-Renaud |
2002019
|
Shot Peening on Pelton Wheels: Methods of Control and
Results
Marconi, Lauro, Bozzolo |
2002020
|
Effect of Shot Peening on Erosion and Fatigue in Combined Bending and
Torsion of the Magnesium Alloy AZ80
Jain, Nadkarni, Sharma |
2002021
|
Characteristics of Surface Layers Produced by Shot
Peening
Schulze |
2002022
|
The Influence of the Velocity of a Peening Medium on the Almen
Intensities and Residual Stress States of Shot Peened Specimen
Zinn,
Schulz, Kopp, Scholtes |
2002023
|
Correlation between Mechanical and Geometrical Characteristics of
Shot and Residual Stress Induced by Shot Peening
Marconi, Citran,
Gregorat |
2002024
|
Influence of Pre-Annealing on Surface and Surface Layer
Characteristics Produced by Shot Peening
Tosha, Lu, Retraint,
Guelorget, Iida |
2002025
|
Endurance Life of Aging Aircraft Components Predicted by Conductivity
Changes in Aluminium 2024
Jack A. Soules, Surface Stress Technology
Inc., Cl |
2002026
|
Shot Peening of Ceramics: Damage or Benefit?
Frey,
Pfeiffer |
2002027
|
Influence of Retained Austenite, Strain-induced Martensite and
Bending Stress upon Shot Peening-induced Residual Compressive
Ando,
Eto, Matsui |
2002028
|
Lining of Metal Surface with Hard-Metal Foil using Shot
Peening
Harada, Mori, Maki |
2002029
|
Relaxation of Shot Peening Residual Stresses in the 7050-T7451
Aluminium Alloy after Heat Cycles for Adhesive Bonding
Roth,
Wortman |
2002030
|
Peen-Forming - A Developing Technique
Peter O"Hara, Metal
Improvement Co Inc, Newsbury, |
2002031
|
Optimising the Double-Sided Simultaneous Shot Peen Forming
Kopp,
Schulz |
2002032
|
Impact Metal Forming
Helmut Reccius, IHR, Gummersbach,
Germany |
2002033
|
Mechanisms and Modelling of Cracking under Corrosion and Fretting
Fatigue Conditions
de los Rios |
2002034
|
Influence of Shot Peening on Stress Corrosion Cracking in Stainless
Steel
Kritzler |
2002035
|
Investigating the Benefits of Controlled Shot Peening on Corrosion
Fatigue of Aluminium Alloy 2024 T351
Curtis, de los Rios, Rodopoulos,
Romero, Levers |
2002036
|
Influence of Shot Peening on the Fatigue and Corrosion Behavior of
the Die Cast Magnesium Alloy AZ91 hp
Muller, Rodriguez |
2002037
|
Shot Peening and Fatigue Strength of Steels
Lang, Schulze,
Vohringer |
2002038
|
The Effect of Shot Peening Coverage on Residual Stress, Cold Work and
Fatigue in a Ni-Cr-Mo Low Alloy Steel
Prevey, Cammett |
2002039
|
Effect of Ultrasonic Shot Peening on Fatigue Strength of High
Strength Steel
Watanabe Hattori Handa Hasegawa Takaji Ikeda
Ducha |
2002040
|
Residual Stress Relaxation and Fatigue Strength of AISI 4140 under
Torsional Loading after Conventional Shot Peening, Stress
Menig,
Schulze, Vohringer |
2002041
|
Influence of Optimized Warm Peening on Residual Stress Stability and
Fatigue Strength of AISI 4140 in Different Material Stat
Menig,
Schulze, Vohringer |
2002042
|
Thermal Fatigue of Shot Peened or Hard Turned Hot-Work Steel AISI
H11
KrauB, Scholtes |
2002043
|
Effect of Short-Time Annealing on Fatigue Strength of Shot Peened
AISI 4140 in a Quenched and Tempered Material State
Menig, Schulze,
Vohringer |
2002044
|
Effect of Shot Peening on Improvement of Fatigue Strength for Metal
Bellows
Okada*, Tange*, Ando** |
2002045
|
Property Improvement in Light Metals Using Shot Peening
Gregory,
Wagner |
2002046
|
Fatigue Strength Improvement of Welded Aluminium Alloys by Different
Post Weld Treatment Methods
Nitschke-Pagel, Wohlfahrt |
2002047
|
Influence of Mechanical Surface Treatments on Notched Fatigue
Strength of Magnesium Alloys
Kuster, Hilpert, Kiefer, Wagner |
2002049
|
Shot Peening to Enhance Fatigue Strength of TIMETAL LCB for
Application as Suspension Springs
Kiese, Zhang, Schauerte and
Wagner |
2002050
|
Effect of Test Temperature on Fatigue of Shot Peened Magnesium
Alloys
Wendt, Ketzmer and Wagner |
2002051
|
Effect of Shot Peening on Fatigue Performance of Gamma Titanium
Aluminides
Lindemann, Roth-Fagaraseanu and Wagner |
2002052
|
Mechanical Surface Treatments on the High-Strength Alpha-Titanium
Alloy KS 120
Kiese, Zhang, Schauerte and Wagner |
2002054
|
Effect of Overloads on Fatigue of Shot Peened 2024 Al
Supik and
Wagner |
2002055
|
Alternative Mechanical Surface Treatments: Microstructures, Residual
Stresses & Fatigue Behavior
Igor Altenberger |
2002056
|
Cavitation Shotless Peening for Improvement of Fatigue
Strength
Soyama, Odhiambo and Saito |
2002057
|
Comparison of the Residual Stresses Induced by Shot (Stress) Peening
and Rolling in Spring Steel
Eckehard Muller |
2002059
|
Influence of Shot Peening and Deep Rolling on High Temperature
Fatigue of the Ni-Superalloy Udimet 720 LI
Lindemann, Grossmann, Raczek
and Wagner |
2002060
|
Shot Peening and Roller-Burnishing to Improve Fatigue Resistance of
the (a+B) Titanium Alloy Ti-6A1-4V
Kocan, Ostertag and Wagner |
2002061
|
Fatigue Performance of the Mechanically Surface Treated Steels
42CrMo4 and 54SiCr6: Shot Peening vs. Roller-Burnishing
Wierzchowski,
Ostertag and Wagner |
2002062
|
Process Control Techniques for Laser Peening of Metals
See
Below |
2002064
|
Roller Pressing or Shot Peening of Fir-Tree Root of LPT Blades of 500
MW Steam Turbine
Sharma |
2002065
|
Comparison of Surface Characteristics and Thermal Residual Stress
Relaxation of Laser Peened and Shto Peened AISI 4140
Menig, Schulze and
Vohringer |
2002066
|
Finite Element Simulation of Shot Peening - A Method to Evaluate the
Influence of Peening Parameters on Surface Characteristi
Schwarzer,
Schulze, Vohringer |
2002067
|
Shot Peening and Coverage
Tange, Okada |
2002068
|
Example of the Computer Simulation of Shot Peening
Process
Nakonieczny, Borkowski, Wymyslowski |
2002069
|
Modeling of Fatigue Behavior due to Shot Peening Conditions
M.K.
Tufft, GE Aircraft Engines, Cincinnati |
2002070
|
Finite Element Impact Modelling for Shot Peen Forming
Wang,
Platts, Levers |
2002071
|
Theoretical Analysis of Beneficial and Detrimental Effects of
Controlled Shot Peening in High Strength Aluminium Alloys
See
below |
2002072
|
Finite Element Simulation of Shot Peen Forming
Zang |
2002048
|
Shot Peening of Cast Magnesium Alloys
Ludian, Hilpert, Kiefer,
Wagner |
2002063
|
High Temperature Fatigue of Mechanically Surface Treated
Materials
Altenberger, Noster, Scholtes, Ritchie |
