1996037
|
Simulation of Residual Stress Distribution on Shot Peening
Y. Watanabe, N. Hasegawa |
1996039
|
Optimization of the Fatigue Strength of Heat Treated Steels as a Consequence of an Optimum State of the Surface and of Subsur
A. Sollich, H. Wohlfahrt |
1996046
|
The Core of Electric Generator What is for Shot Peening?
Djozic Salko, B.Sc |
1996047
|
Effects of Shot Peening and Heat Treatment on Endurance Limits of Austempered Ductile Cast Iron Gears
S.Ezoe, M.Hashimoto, I.Asano, Y.Tanno |
1996048
|
The Effect of Shot Peening on Residual Stress and Stress Corrosion Cracking for Austenitic Stainless Steel
M. Obata, A. Sudo, J. Matsumoto |
1996049
|
Improvement of Surface Durability of Case-Carburized and Hardened Gear by Shot Peening and Barrelling Processes
Munetoh Hashimoto, Sigeru Hoyashita |
1996050
|
Improving the Fatigue Resistance of Stiffener/Lower Flange Connection in Steel Bridge Beams
J. Menigault, J. Claeys, J. Vigo, Y. LeGuernic |
1996051
|
The Protection of the Propellers Blades Surfaces by the Shot Peening
Djozic Salko |
1996052
|
Shot Peenig to Prevent Intergranular Corrosion of Ferritic Stainless Steel
E. Lamaire, y. LeGuernic, F. Roch, C. Scott |
1996053
|
Shot Peening in Preventing Coal Bunker Failure
VS Nadkarni, MC Sharma |
1996054
|
Shot Peening to Reduce Fatigue and Wear in Tillage Implements
SK Rautaray, MC Sharma |
1996055
|
1/4 Tank Bulkhead Segment for the European Ariane 5
Wustefeld, Kittel, Kopp, Linnemann, Werner, Durr, |
1996056
|
Developments in Interactive Control of Shot Peening Intensity
David Kirk |
1996057
|
Galling - Shot Peening of the Bolts
Djozic Salko |
1996058
|
Multi-Purpose CNC Shot Peening Plant with High Production Efficiency by Baiker AG
Steven Baiker |
1996059
|
Shot Velocity Measurement
W.Linnemann, R.Kopp, S.Kittel, F. Wustefeld |
1996060
|
Behaviour of Shot Peened Welded Steel Under Cyclic Loading
Hamidi, Fathallah, Barrallier, Shidhom, Castex |
1996061
|
Characterization of the Defect Depth Profile of Shot Peened Steels by Transmission Electron Microscopy
Martin, Altenberger, Scholtes, Kremmer, Oettel |
1996062
|
A Comparison of the Effect of Peening Using Cut Wire and Cast Steel Shot on Fatigue Performance of 7010-T7651 Aluminium Alloy
Peter Edwards |
1996063
|
Effect of Heat Treatments on the Relief of Residual Stresses and Recrystallization Behaviour of Shot Peened ZR-2.5NB Pressure
Amouzouvi, Styles, Clegg, McCooeye, Zhao,
Koul |
1996064
|
Effect of Shot Peening on Residual Life of Fatigue Pre-Damaged 2024 AI
T. Dorr, L. Wagner |
1996065
|
Effect of Shot Peening on Stress Corrosion Cracking (SCC) of 7075-T6 Aluminium Alloy
H. Rahmatalla, M. Al-Rimawi, T. Al-Hadid |
1996066
|
Evaluation of Surface Modifications in High Strength Steel
D Jiles, R Kern, W Theiner |
1996067
|
Fatigue and Heat Transfer Behaviour of Shot Peened Aluminium Alloy
MC Sharma |
1996068
|
Image Analysis of Shot Peening Media
Bob Gillespie |
1996069
|
Influence of Stres Gradient on Fatigue Behavior on Shot Peened Timetal 1100
T. Dorr, L. Wagner |
1996070
|
Investigation of Shot-Peening and Re-Peening Effects on Partially Fatigued Notched Components
Dr. S. Kyriacou, Dr. J. Al-Khaja |
1996071
|
Optimization of the Fatigue Behaviour of Welded Joints by Means of Shot Peening - A Comparison of Results on Steel and Alum J
H. Wohlfahrt, T. Nitschke-Pagel, W. Zinn |
1996073
|
Residual Stresses, Microstructure and Fatigue Behaviour of Carburized Layers Before and After Shot Peening
A. Nakonieczny, W. Szyrle |
1996074
|
The Significance of Almen Intensity for the Generation of Shot Peening Residual Stresses
Herzog, Zinn, Scholtes, Wholfahrt |
1996075
|
Some Properties of the Overheated WT3-1 Titanium Alloy After Glass Bead Peening or Bearing Ball Peening
Mieczyslaw Korzynski |
1996076
|
Qualitative Analysis about Effect of Shot Peening on Fatigue Limit of a 300M Steel under the Rotating Bending Condition
S Peige, Y Mei, L Xiang-bin, R Jilai, W Renzhi |
1996077
|
Work-Softening and Strain-Induced Transformation Produced by Shot Peening and Grit Blasting for Austenitic Stainless Steel
Kisuke Iida, Katsuji Tosha |
1996078
|
Almen Strip Variability - A Statistical Treatment
Marvin Happ, David Rumpf |
1996079
|
The Development of Residual Stresses and Curvature in Mild Steel by Needle Peening
David Kirk |
1996080
|
Full Assurance Shot Peening of Aircraft Gas Turbine Engine Components
P. Bailey, D. Lombardo, H. Popp, R. Thompson |
1996081
|
The Practical use of Statistical Process Control and Computer Monitored Equipment in the shot Peening Process
Charlie Mason, Ken I'Anson |
1996082
|
Investigation on Shot Peening Strengthening of Rene'95 Powder Alloy
Ru Jilai, Wang Renzhi, Li Xiangbin |
1996083
|
Modelling the Influence of the Shot Size Dispersion on the Evolutin of the Residual Stess Profiles vs Time in Shot Peening
H. Chardin, S. Slim, G. Inglebert |
1996084
|
Relaxation Behavior of Shot Peening Induced Residual Stresses in AISI 4140 due to Quasistatic Uniaxial Loading at Elevated Te
Holzapfel, Schulze, Vohringer, Macherauch |
1996085
|
Relaxation of Residual Stress Distribution Produced by Shot Peening Under Fatigue Test
Kisuke Iida, Kazunori Taniguchi |
1996086
|
Relaxation of Shot Peening Induced Residual Stresses in Quenched and Tempered Steel AISI 4140 Due to Uniaxial Cyclic Deformat
Schulze, Lang, Vohringer, Macherauch |
1996087
|
Stability and Relaxation Behaviour of Shot Peening Induced Residual Stresses in AISI 4140 During Bending Fatigue
Holzapfel, Schulze, Vohringer, Macherauch |
1996088
|
Variation of Surface Residual Stress Measured by Several X-Ray Projection Area for Peened Surface
Katsuji Tosha, Kisuke Iida |
1996089
|
Fatigue Crack Propagation Behaviours in Shot Peened Layers of Metals
Z Feng, J Zhang, X Chen |
1996090
|
Fundamental Aspects of Shot Peening Coverage Control Part One: Formulation of Single and Multiple Impacting
M Y Abyaneh |
1996091
|
Fundamental Aspects of Shot Peening Coverage Control Part Two: Simulation of Single and Multiple Impacting
M Y Abyaneh |
1996092
|
Fundamental Aspects of Shot Peening Coverage Control Part Three: Coverage Control Versus Fatigue
M Y Abyaneh, David Kirk |
1996093
|
Modelling of Shot Peening Residual Stresses and Plastic Deformation Induced in Metallic Parts
R. Fathallah, G. Inglebert, L. Castex |
1996094
|
Peenstress Software Selects Shot Peening Parameters
Yves LeGuernic, John Eckersley |
1996095
|
The Reality of Shot Peen Coverage
Dale Lombardo, Pete Bailey |
1996096
|
Shot Peening Mechanics, A Theoretical Study
Dr. S. Kyriacou |
1996097
|
Shot Peening and Robust Design for Fatigue Performance
I Nevarez, D Nelson, M Esterman, K Ishii |
1996099
|
Non-Destructive Residual Stress Measurement Using Eddy Current
Hong Chang, Fred Schoenig, Jack Soules |
1996125
|
Development of a Fracture Mechanics Methodology to Access the Competing Mechanics
Marsha K. Tufft |
1996126
|
Instrumental Single Particle Impact Tests Using Production Shot: The Roll of Velocity, Incidence Angle and Shot Size
Marsha K. Tufft |
