Papers presented at ICSP-3 in Garmisch-Partenkirchen, Germany , 1987
All articles are available in the library at the www.shotpeener.com website.
Click the link below to access the abstract and link for full download.

 

1987015	Development Of Mechanical Surface Strengthening Processes From The Beginning Until Today Kloos, K. H. and Macherauch, E.
1987099	The Responsibility For Reliability Balcar, G. P.
1987058	Modern Shot Peening Technology Nachman, G.
1987150	About The Influence Of Different Separation Systems On Shot Peening Treatment Kreikenbaum, H. and Fischer, G.
1987011	Controlled Shot Peening, Complete Plants And Examples Of Application Bosshard, R.G. and Hornauer, K.P.
1987042	Important Considerations For Utilizing Shot Peening As A Design Tool Simpson, R.S. and Garibay, R.P.
1987100	The Total Cost of Weight Revisited: An Essay on Cost as a Function of Weight in automobiles and the Use of Shot Peening to R Terry, S.L. and Simpson, R.S.
1987101	The Use Of The Shot Peen Process As A Design Tool Through The Use Of Microprocessors Daly, James J.
1987005	Automated Shot Peen Quality Control Through The Use Of Parametric Sensors R. Gillespie, and W. Hasty Jr
1987095	The Effect Of Inherent Tolerances In The Almen Test Strip On Shot Peening Process Reliability Simpson, Clark, Chiasson
1987003	Application Of Shot Peening And Blasting Methods In The Aircraft Industry Nagel, G.
1987016	Dovetail Peening By The Deflector Method Happ, M. B.
1987055	Maximization Of Flexural Fatigue Strength Of Heat-treated Steel Specimens Using Mult.peen.techniques Woelfel, M. M.
1987083	Shot Peening Of Nodular Cast Iron Parent-Simonin and J Flavenot
1987087	Shot Peening To Prevent Stress Corr.cracking And Corr.fatigue Failures Of Austenitic Stainless Steel Risch, K.
1987010	Controlled Shot Peening Can Help Prevent Stress Corrosion Cracking Gillespie, B.
1987088	Shot Peening, Special Application And Procedure Kiefer, B.
1987000	Additional Shot Peening For Workshop Salko, Djosic
1987044	Improved Fatigue Performance Of Gears Through Controlled Shot Peening Diepart, C.P. and Burrell, N.K.
1987097	The Investigation Of Operating Properties Of The Surface After Hammering Barski, T.
1987008	Changes In The State Of The Material By Shot Peening Vohringer, O.
1987022	Effect Of Work-piece Hardness On Peening Intensity Under Local Peening Sharma, M. C.
1987025	Effects Of Plastic Straining On Residual Stresses Induced By Shot-peening Kirk, D.
1987108	X-ray Microstructure And Resid.stress Analysis Of Shot Peened Surface Layers During Fatigue Loading Bergstrom, J. and Ericsson, T.
1987047	Influence of Change of Microstructure and residual stress field in surface Shot Peen Strain Layer on Fatigue Behavior Qiu, Q. and Wang, R.
1987102	Thermal Relaxation Of Shot Peening Resid.stresses In The Diff.heat Treated Plain Carbon Steel Ck 45 Hoffmann, Scholtes, Vohringer
1987084	Shot Peening Of The Gear Surface With Ground Cracks Y. Tan, B. Ma, L. Ren, Q. Ye
1987052	Influence Of The Shot Peening Angle On The Condition Of Near Surface Layers In Materials Ebenau, Vohringer, Macherauch
1987103	Topography And Fracture Studies Of Surfaces Shot Peened At Different Intensities Simpson, R.S. and Probst, R.L.
1987075	Selected Examples On The Topography Of Shot Peened Metal Surfaces Kohler, W. and Hornauer, K.-P.
1987004	Application Of The Incremental Hole Drilling Method For The Measurement Of Residual Stress Distribution In Shot-peened Comp. Lu, J. and Flavenot, J.F.
1987081	Shot Peening Of Fast And Electroheated Metals Al-Obaid, Ismail, Al-Bassam
1987070	Recent Developments In Shot Peen Forming Kopp, R. and Ball, H.
1987077	Shot Peen Forming - An Economical Solution Tatton, R.J.D.
1987063	Peen Forming By Pointed Ball Shooting (ball Shot Forming) Clausen, R. and Bruder, M.
1987078	Shot Peen-forming Of Nc-machined Parts With Integrated Stringers Using Large Balls Meyer, Reccius, Schulein
1987060	On The Effects Of Shot Peen.on The Fatigue Strgth.and The Resid.stresses Of Parts Made Of Ti A16 V4 Kussmaul, Guth, Stuttgart
1987034	Fundamental Aspects Of The Effect Of Shot Peen.on The Fatigue Strgth.of Metallic Parts And Structure Lieurade, H.P. and Bignonnet, A.
1987009	Computer Simulation Of Different Surface Topographies Of Metals Produced By Blasting Processes Knotek, O. and Elsing, R.
1987028	Fatigue Behavior Of Shot Peened Steel Desvignes, Gentil, Khabou
1987024	Effects Of Peening On Superconducting Transition Properties Nishi, Harano, Hara, Furukawa, Ninomiya
1987023	Effects Of Peening On Magnetic Properties In Soft Magnetic Alloys Nishi, Harano, Kai, Tachi
1987105	Use Of A Finite Element Meth.for The Prediction Of Shot-peened Resid.stress Relaxation During Fatigu Lu, J. and Flavenot, J.F.
1987002	Analysis Of Some Particular Cases Of Shot-peening And Their Influence On Field Of Residual Stresses Barret, L. and Cailliau, J.
1987094	Testing Of Shot Blasting Regimes And Metal Prod.surf.hardening Parameters By Barkhausen Effect Meth Filinov, V. and Shaterniklov, V.
1987071	Relationship Between Shot Peening Surface Strain Layer And The Fatigue Str. Of High-str.alum.alloy Renzhi, Xiangbin, Hen
1987001	An Investigation into the Influence on the Fatigue Strength of Aluminium Alloy Parts of Load Spectrum Base Level and Residual Jaensson, B. and Magnusson, L.
1987021	Effect Of Shot-peening On Fatigue And Fretting Fatigue Behaviour Of 8090 And 7010 Aluminum Alloys Fair, Noble, Waterhouse
1987061	Optimization Of Shot Peening To Improve The Fatigue Strength Of Ti-6a1-4v Franz, H.E. and Olbricht, A.
1987049	Influence Of Shot Peening Induced Surface Roughness, Residual Macrostresses and Dislocation Density on the Elevated Temperatu Gray, Wagner, Lutjering
1987020	Effect Of Shot Peening Conditions On Fatigue Strength Of Two Alloys For Turboengines Disks Guedou, and Evry
1987018	Effect of Modified Surface Microstructures through Shot Peening and Subsequent Heat Treatment on the Elevated Temperature Fat Gray, Wagner, Lutjering,
1987029	Fatigue Behaviour Of Shot Peened Tia16v4 In The Temperature Range 20 Deg.c < T < 450 Deg. C Hanagarth, Vohringer, Macherauch
1987092	Study of Fatigue Damage in Shot Peened Aluminium Alloys using Acoustic Emmission and Macro/Microscopic X-Ray Diffraction Inve Bonnafe, Maeder, Bathias, Compiegne
1987080	Shot Peening Of Components To Improve Fatigue Strength Schutz, W.
1987048	Influence of Peening Parameters, Coating Temperatures and Operating Loads on Residual Stresses of Shot-Peened Barrell Springs Hutter, W. and Kloos, K.H.
1987089	Size Effect On Fatigue Strength Of Shot Peened Carburized Steel Hisamatsu, S. and Kanazawa, T.
1987098	The Research To The Contact Fatigue Behaviour Influenced by the Residual Stresses on the Surface of the Shot Peened Specimen Zhu, J. and Guo, P.
1987046	Improvement To The Fatigue Strength Of Drop-forged Specimens By Airless Blast Cleaning Kloos, Kaiser, Oppermann
1987043	Improve Fatigue Limit On Coil Spring N. Hu, X. Liu, J. Yao and K. Jin
1987031	Fatigue Strength Of Case Hardened And Shot Peened Gears Hirsch, Wohlfahrt, Macherauch
1987069	Practical Aspects of Application of Shot Peening to Improve the Fatigue Behaviour of Metals and Structural Components Wohlfahrt, H.
1987085	Shot Peening Of Welded Joints And Residual Stress Relaxation During Fatigue Bignonnet, Lieurade, Picouet, Castex
1987050	Influence Of Shot Peening On Fatigue Of Sintered Steels Under Constant And Variable Amplitude Loadng Sonsino, C.M. and Koch, M.
1987096	The Effect Of Shot Peening On Fatigue Strength Of Zinc Coated Steels Burakowski, Nakonieczny, Babul
1987033	Fatigue Strength Of Work Softening Layer Produced By Shot Peening Iida, K. and Tosha, K.
1987086	Shot Peening On Torsion Fatigue J. He, Y. Wu, Y. Yu, J. Flavenot
1987073	Residual Stress Concentration And Its Effect On Notch Fatigue Strength Zhang, K. Xu, X. Wang, N. Hu
1987051	Influence Of Shot Peening On The Bending Fatigue Behaviour Of Notched Specimens Of Ck 45 Hoffmann, Lohe, Macherauch
1987062	Optimum Peening Intensities Fuchs, H. O.
1987113	Fatigue Progress in Shot-Peened Surface Layers. (Retroactive Coverage). Berns, H ; Weber, L
1987053	Investigation On The Effect Of Shot Peening On Elevated Temperature Fatigue Behavior Of Superalloy Chen, Y. and Wang, R.
1987032	Fatigue Strength of Shot-Peened Grade 35 NCD 16 Steel. Variation of Residual Stresses Introduced by Shot Peening According to Bignonnet, A.
1987026	Effects Of Shot Peening On The Corrosion Fatigue Properties Of Spring Steels Kaiser, B.
1987045	Improvement Of Ni 18 (250) Maraging Steel Weldment Fatigue Strength Through Shot Peening Banas, G. and Lawrence,Jr., F.V.